/ Products /  D160 BTA Digital

Easy-Laser® D160 is attached in a few seconds (magnets) with the laser transmitter on one of the sheaves and the detector on the other. The separate display unit makes it all even easier, as you can read off and follow the adjustment at the precise point on the machine where the adjustment is made.

The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The display is also backlit for optimum visibility in poor lighting conditions.

The accuracy of the digital readout means that you can align within prescribed tolerances and rely on the result.

Connect to display unit D279
The Easy-Laser® D160 detector unit can be connected to our standard display unit D279*, which is included in shaft alignment systems D505 and D525, for example. The pulleys’ mutual parallelism is shown graphically and digitally with adjustment and shim values for the machine’s foot pair. The D279 also allows you to save, print out and transfer the measurement results to a PC, in the same way as for normal shaft alignment.

*Does not apply for system D450, which does not have the required software for sheave alignment. NB! Requires software version 1.06 or later for Display unit D279.

Typical applications:
Most belt/chain drives.