| |
Program description |
5 |
13 |
14 |
27 |
 |
Horizontal 9-12-3 |
For alignment of horizontal machines according to the 9-12-3 method. |
√ |
√ |
√ |
√ |
 |
Soft foot |
With this program you can check that the machine is standing on all its feet. Shows which foot should be corrected. |
√ |
√ |
√ |
√ |
 |
Thermal growth compensation |
Compensates for difference in thermal expansion between machines. Sub-function. |
√ |
√ |
√ |
√ |
 |
Tolerance check |
Checks the shaft alignment readings for offset and angle against the selected tolerance. Graphic representation when alignment is within the tolerances. Sub-function. |
√ |
√ |
√ |
√ |
 |
Measurement value filter |
Advanced electronic filter function for a reliable measurement result even in a poor measurement environment, e.g. where there is air turbulence or vibrations. Sub-function. |
√ |
√ |
√ |
√ |
 |
EasyTurn™ |
For alignment of horizontal machines. Allows complete measurement with only 40° rotation of the shafts. |
|
√ |
√ |
√ |
 |
Cardan |
Shows angular errors and adjustment values on cardan-shaft-coupled/centre-offset machines. (Requires accessory fixtures.) |
|
√ |
√ |
√ |
 |
Vertical |
For measurement of vertical and flange-mounted machines. |
|
√ |
√ |
√ |
 |
Machine train |
For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen. |
|
√ |
√ |
√ |
 |
RefLock™ |
Any pair of feet can be locked/set as a reference. This is a sub-function in the Machine train program. |
|
√ |
√ |
√ |
 |
Offset and angle |
Shows centre offset and angular error between two shafts, for example.
Also suitable for dynamic measurements. |
|
√ |
√ |
√ |
 |
Values |
Shows live readings from S and M units. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and reset individually. NB! Measurement units for D550 cannot be connected in series. |
|
√ |
√ |
√ |
 |
Vibrometer |
Shows the vibration level in "mm/s" and bearing condition value in "g". Measurement complies with vibration standard ISO10816-3. (Used with Vibrometer probe.) |
|
|
√ |
√ |
 |
BTA digital |
For alignment of belt and chain drives. (Used with BTA Digital transmitter and detector unit.) |
|
|
√ |
√ |
 |
Straightness |
For straightness measurement of (for example) machine bases, shafts, bearing journals, machine tools, etc. Can handle up to 150 measurement points with two zero points. |
|
√ |
|
√ |
 |
Straightness Plus |
Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required. Applications as above. |
|
|
|
√ |
 |
Flatness |
Program to measure flatness/twist of (for example) machine bases, machine tables, etc. Can handle up to 300 measurement points with three zero points. |
|
|
|
√ |
 |
Squareness |
For measurement of squareness in machines and installations. |
|
|
|
√ |
 |
Parallelism |
For measurement of parallelism between rolls, machine ends, etc. Can handle up to 150 rolls/measurement objects. The base line or any roll may be used as a reference. Every object can be individually named. |
|
|
|
√ |
 |
Parallelism Plus |
Versatile program with advanced functions. Measurement objects can be added, removed or re-measured at any point during the measurement process. Includes base line measurement function. Applications as above. |
|
|
|
√ |
 |
Spindle direction |
For measurement of the pointing direction of machine spindles in machine tools, drilling machines, etc. |
|
|
|
√ |
 |
Centre of circle |
Used for straightness measurement of bearing journals when the hole diameter varies. For example, diesel engines, propeller shaft installations, etc. |
|
|
|
√ |
 |
Centre of circle Plus |
Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required. Applications as above. |
|
|
|
√ |
 |
Half-circle |
Readings taken in three positions: 9, 6 and 3. Allows varying diameters. To be used together with the turbine system. |
|
|
|
√ |
 |
Half-circle Plus |
Versatile program with advanced functions. Measurement points can be added, removed or re-measured at any point during the measurement process. The reference line can be offset as required. Applications as above. |
|
|
|
√ |
 |
Plumb line |
With this program you can measure plumb (vertical) and straightness of turbine and generator shafts, for example. |
|
|
|
√ |
 |
Flange |
For flatness measurement of flanges and circular planes, slewing ring bearings and tower flanges for example. Can handle up to 300 measurement points, can also be distributed on the inner and outer circle if necessary. Three zero points at 120° pitch are computed by the system. |
|
|
|
√ |
