|
Software |
 |
 EasyLink™
You can now easily transfer measuring results from the display unit to the history database and produce reports, or export the results to an Excel chart for further analysis.
The program supports a large number of applications: shaft alignment, straightness, squareness, parallelism (e.g. rolls), flatness, flange (e.g. slewing bearings), plumb lines, etc.
Works with Windows® 2000/XP/Vista/Win7
The program is completely free and contains a full version.
Download brochure (pdf) »
EasyLink™ full installation (D- & E-series)
For a standard PC or laptop connected to the Internet – just download and start. |
|
|
|
EasyLink™ Update (D- & E-series)
Updates always contains the latest version and can be downloaded at any time.
All earlier data is saved during an update.
|
|
|
Driver for RS232/USB, general information
Type A is the only one that works with the new version of driver and operating systems Windows Vista and 7 (see below). If there is no text "Made in China" (type B or C), only older versions can be used. Type B and C cannot be used with Windows Vista or 7.
Type A. Driver for new RS232/USB dongle (XP/Vista/Win7)
Driver for new RS232/USB dongle (XP/Vista/Win7)
Type B and C. Driver for previous version RS232/USB dongle (W98/W2K/XP)
|
|
|
E series Display unit Firmware Update
Download the file to your PC, unzip and copy to the root of a USB memory.
Insert the USB memory to the display unit. In the System update view, select the file and press OK.
Note! Do not remove the USB memory until the installation is finished. The display unit automatically restarts when the installation is finished. During restart, the screen turns black for up to one minute. After restart you will see the Main menu. If the display unit in this state freezes (no response when buttons are pressed), press the On/Off button for at least 15 sec, then the system will restart.
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
