We offer measurement and laser alignment solutions for every kind of industry.

Measuring programs and functions

There are four different program configurations for the Easy-Laser® systems:
5 programs/functions = System D450
14 programs/functions = System D505
13 programs/functions = System D550
27 programs/functions = System D525,D600,D630,D650,D660,D670 and D800

Program description	5	13	14	27
Horizontal - For shaft alignment of horizontal machines with the 9-12-3 method.
Softfoot - With this program you can check that the machine is standing on all feet. Displays wich foot to correct
Thermal growth compensation -Compensates for difference in thermal growth between machines. This is a sub-program in the machine train program.
Tolerance check -Checks the offset and angle values towards selected tolerance. Shows graphically when the alignment is within tolerance. Sub function.
Measurement value filter -Advanced electronic filter function for accurate measurement result even in poor measuring conditions like air turbulence and vibration. Sub function.
EasyTurn™ -For the alignment of horizontal machines. Allows complete measurement with only 40° rotation of the shafts.
Cardan - Shows angular errors and adjustment value on cardan-shaft-coupled/centre-offset machines. (Requires accessory fixtures.)
Vertical - For measurement of vertical and flange-mounted machines.
Machine train -For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen.
RefLock™ -Any pair of feet can be locked/set as a reference. This is a sub-function in the machine train program.
Offset and angle -Shows centre offset and angular error between two shafts, for example. Also suitable for dynamic measurements.
Values -Shows live readings from S- and M-unit. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and be zeroed individually. Note: Detectors in system D550 can not be connected in series,
Vibrometer -Shows vibration level in "mm/s" or "inch/s" and bearing condition value in "g". The measurement complies with vibration standard ISO10816-3.
BTA digital -For alignment of belt and chain drives. (Requires accessories BTA Digital transmitter and detector unit.)
Straightness -For straightness measurement of (for example) machine foundations, shafts, bearing journals, machine tools, etc. Can handle up to 150 measuring points with two zero points.
Straightness Plus - Versatile program with advanced functions. Measurement points can be added, deleted or remeasured anytime during the measurement. The reference line can be offset set. For use as described above.
Flatness -Program to measure flatness/twist of (for example) machine foundations, machine tables, etc. Can handle up to 300 measuring points with three zero points.
*Squareness* -For measurement of squareness in machines and installations.
*Parallelism* -For measurement of parallelism between rolls, machine ends, etc. Can handle up to 150 rolls/measurement objects. The base line or any roll may be used as a reference. Every object can be individually named.
Parallelism Plus - Versatile program with advanced functions. Measurement objects can be added, deleted or remeasured anytime during the measurement. Includes baseline measurement function. For use as described above.
*Spindle direction* -For measurement of the pointing direction of machine spindles in machine tools, drilling machines, etc.
Center of circle -Used for straightness measurement of bearing journals when the bore diameter varies.For example diesel engines, propeller shaft installations, etc.
Center of circle Plus - Versatile program with advanced functions. Measurement points can be added, deleted or remeasured anytime during the measurement. The reference line can be offset set. For use as described above.
Half-Circle -Readings are taken at three positions, for example 9, 6 and 3. Allows varying bore diameters. To be used together with the Turbine system.
Half-Circle Plus - Versatile program with advanced functions. Measurement points can be added, deleted or remeasured anytime during the measurement. The reference line can be offset set. For use as described above.
Plumb line -With this program you can measure plumb (vertical) and straightness of turbine and generator shafts, for example.
Flange - For flatness measurement of flanges and circular planes, slewing ring bearings for example. Can measure up to 300 points, measurements can be taken on the inner and/or the outer circle. Three zero points at 120° pitch are computed by the system.

Easy-Laser® — Easy to learn, Easy to use, Easy to own !