|
Program description
|
|
Horizontal - For shaft alignment of horizontal
machines with the 9-12-3 method. |
|
Softfoot - With this program you can
check that the machine is standing on all feet.
Displays wich foot to correct |
|
EasyTurn™ -For the alignment of
horizontal machines.
Allows complete measurement with only 40°
rotation of the shafts. |
|
Cardan - Shows angular errors and
adjustment value on cardan-shaft-coupled/centre-offset machines.
(Requires accessory fixtures.) |
|
Vertical - For measurement of vertical
and flange-mounted machines. |
|
Machine train -For the alignment of
two to ten machines in a row (nine couplings).
The entire alignment can be followed live on the screen. |
|
RefLock™ -Any pair of feet can be
locked/set as a reference.
This is a sub-function in the machine train program. |
|
Thermal growth compensation
-Compensates for difference in thermal growth between machines.
This is a sub-program in the machine train program.
|
|
Tolerance check
-Checks the offset and angle values towards selected tolerance. Shows graphically
when the alignment is within tolerance. Sub function.
|
|
Offset and angle
-Shows centre offset and angular error between two shafts, for example.
Also suitable for dynamic measurements.
|
|
Values
-Shows live readings from S- and M-unit.
Can be used for shaft alignment, straightness measurement and dynamic
measurement.
Up to four detectors can be connected in series and be
zeroed individually.
|
|
Vibrometer
-Shows vibration level in "mm/s" or "inch/s" and bearing condition value in "g".
The measurement complies with vibration standard ISO10816-3.
|
